FOB - Midwest Warehouse
CAPACITY: 6000 lbs.
BATTERY: Compartment: 31.12” x 13.12” x 31.62 Anderson 175 Gray—A-11 Min/Max battery weight 975/1500lbs.
TRAVEL SPEED: 24-volt ZAPI Travel Controller Variable 0 mph up to 3.5 mph empty Variable 0 mph up to 3.4 mph loaded
TIRES AND WHEELS PRESS-ON DRIVE: 10” x 4” polyurethane LOAD 2 - 3.25” x 6.5” polyurethane
TILLER ARM CONTROLS: Travel, lift, and lower functions are located in the ergonomic operator handle. All operator controls are accessible without having to lift the hand from the handle. Angle grips are designed to allow easy operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard. Low mounted tiller arm offers excellent operator comfort and minimum steering effort. Gas assisted spring handle gently returns handle to vertical position.
ELECTRICAL: Heavy-duty, 24-Volt system for demanding warehouse applications. The programmable ZAPI traction control and matching drive motor provide high performance throughout the entire speed range. Travel speed remains constant relative to throttle position regardless of load. Separately fused power control circuits, quick disconnect EPD power cut off, hour meter / battery discharge indicator combination gauge complete the system. Power configurations and diagnostic features are standard.
HYDRAULICS: Heavy duty pump motor with center mounted lift cylinder. Heavy-duty, pump unit, motor, hydraulic reservoir, solenoid, and gear pump. Integral pressure compensated flow control valve regulates lowering speeds.
DRIVE UNIT: Vertically mounted drive motor is directly mounted to gear housing. Oil bathed hypoid bevel gear drive train with tapered roller bearings transfers power to axle. State of the art optimized gear technology supplies advantages such as minimal envelope circle, zero maintenance, low noise level, high efficiency and high performance. Regenerative electromagnetic brake is mounted on motor armature shaft multiplying the braking power through the transmission. Brake is applied when control arm is in the vertical or horizontal handle position. System features anti-roll back and neutral braking.
FORK ASSSEMBLY: Pallet entry slide allows easy pallet entry by lifting the fork up and over bottom board. Eight easily accessed grease zerks for ease of maintenance.
ACCESSIBLITY: Heavy duty composite one piece cover exposes major components for inspection and maintenance.